Поиск

Quick mold change system｜QMCS｜for Injection molding｜Sistemas de cambio rápido del molde｜FORWELL

Forwell has been a pioneer of Quick Mold Change Systems for many years. With over 20 years of experience in developing these systems they can offer you the best for your molding operations. These fully customizable Quick Mold Change Systems drastically minimize setup times, maximize efficiency and increase safety. Forwell’s Quick Mold Change System can be designed to fit almost any injection molding machine and mold casting machine to allow for quicker mold change times, resulting in shorter machine down time and increased productivity. This system uses a special mold clamp that does not require a cut out on the mold, increasing its application versatility and allowing it to be used with a large number of different molds. Quick Mold Change Systems can rapidly transform your workshop, allowing for easy changeover for small batches, reduced labor costs and reduced stock holding. Coupling this system with a Mold Cart System will allow for fully automatic mold changing, further increasing the efficiency and productivity of your manufacturing operations. When installing a Quick Mold Change System for your injection molding and mold casting operations there are a number of direct and indirect benefits. Review the following table to see an overview of all of these benefits. Indirect Benefits Die Standardization Press Standardization Increased Safety Improved Working Environment Increased Competitiveness Direct Benefits Reduction in Die Change Time Efficient Small Batch Runs Reduced Stock Handling Higher Productivity and Quality Reduction in Labor Costs

Rapid Dryer (RD)-GREEN PRODUCT-SAVING 50%-Reduce carbon emissions | YANN BANG

Without replace your old hopper dryer, use this new dryer to dry faster with better quality and to upgrade production more efficiently. Save time and energy. Patented technology significantly shortens the drying time. Normally NYLON takes four hours to dry. Work with Yann Bang’s rapid dryer (RD), it only takes two hours to dry completely and ready to use. RD can decrease 50% of drying hours and save 50% of energy for you.

Shrink Sleeve Conversion Seaming Machine - K5 Plus | WEBCONTROL

Machine Specification - WEBCONTROL Seaming Machine K5 Plus: -Machine Speed: 500 m/min -Width: 350 mm -Material Width: 720 mm -Unwind Diameter: 600 mm (Option 800 mm) -Rewind Diameter: 600 mm -Minimum Lay Flat Width: 40 mm with 18 mm option -Core Diameter: 3" (76 mm) -Lay Flat Tolerence: 0.25 mm The K5 PLUS combines all the advantages of the new PLUS technology with non-stop operation. The new PLUS series is the most advanced seamer in the industry. WEBCONTROL has once again innovated by launching the third generation of seamers which eliminates the forming tool. This new patented design makes the K5 PLUS the most operator friendly machine available, facilitating operator training with the most automated machine on the market. The K5 PLUS has 3 tension zones, which allows for a dedicated tension zone in the forming section for better layflat control. The unwind tension zone is now free to add innovations like laser integration for t-perforation or pin hole perforation while the film is flat. The K5 PLUS offers a long list of advantages that solve the issues that come with the previous generation of machines that use forming tools. This new machine promises to revolutionize the way shrink sleeves are converted. Make sure you see it before making any decisions.

2024 CHINAPLAS Interview | CHINAPLAS

We are here with Ms. Ada from the CHINAPLAS. She also shared very useful information about the forthcoming CHINAPLAS 2024 including the focus of the exhibition.

Company Introduction | ALFA

Alfa Industrial soul thought - professional quality, put product quality in the first place. Whether it is the procurement of parts in the early stage or the final machine inspection, Alfa Industrial strictly monitors every link, every process and every detail to ensure the stability and performance of each machine. Email: [email protected]

Saudi PPPP Through Familiar Eyes: Cosmo’s Perspective on an Evolving Show

Where is Saudi PPPP headed? In this on-site interview, Cosmo shares insights from years of participation, noting subtle shifts—like fewer machines on display. More significantly, Messe Düsseldorf’s quiet partnership hints at deeper changes in the region’s manufacturing and exhibition landscape

Two Platen Injection Molding Machine 600TPIIR | CLF

Two Platen Injection Molding Machine 600TPIIR 3D animation from CLF. CLF is specializing in manufacturing plastic injection molding machines with super-large, high precision, and high performance. 【HIGHLIGHTS OF THE MACHINE】 Clamping Force 1800~4000 TONS Unique two-platen design for clamping mechanism exhibits exceptionally high-speed clamping feature. Clamping force, mold opening stroke, and distance between tie bars are easy to customize. Quick and accurate mold adjustment makes the machine suitable for small lot flexible production. Uniform force distribution on mold ensures the high accuracy of the product. Uniform tension force on tie bars for the dramatic increase of service life. Simplified construction with no wearing problem on toggle clamp. Rigid machine structure, minimum deformation, and consistent product accuracy.

Hydraulic Die Cutting Machine (HDR 0505) | Yicheen

Yicheen specializes in manufacturing Rewinding Hydraulic Die Cutting, which high speed sliding table feeding, motion is fast and safe.

2024 CHINAPLAS Interview | HCI

We are here with Terence from HCI Converting Equipment at the CHINAPLAS. HCI is a specialist in the Converting Equipment and Slitter Rewinder machinery, able to provide from a single machine to whole plant equipment. We heard very valuable information from Terence, thank you so much!

Fully Automatic Coreless Bottom Sealed Bags On Roll Making Machine | CHAO WEI

【Machine Spec & Features】 Bottom Sealed Bags On Roll Making Machine (Coreless) Film width: 600 mm / Thickness: 15 micron E.P.C Control & Rollers Device (E+L, German made) Length: 750 mm x Speed: 135 Pcs/Min Production Line Speed: 100M/Min Servo Driven Shuttle Type Sealing & Perforating Unit Two Sets Triangle Folders For Making Finished Roll With Small Width Machine Maintains High Speed Production By 4 Sets Rewinding Shafts While Producing Small Quantity Of Bags Per Roll   【Company Introduction】 Chao Wei Plastic Machinery is an advanced manufacturer of plastic bag making machine with more than 35 years of experience with ISO 9001 & CE certificates in Taiwan. One of the reasons for the excellence of Chao Wei’s machines is our dedication to research and development.

Twin Screw PVC Pelletizing Line | TWIN SCREW

We are a pioneer of twin screw extruder. Description: TWIN SCREW EXTRUDER ⚫With two parallel counter-rotating screws for the palletizing. ⚫Reduction and torque-distribution unit with hardened, ground shafts and gear. ⚫Long service life for the processing units due to lower specific drive energy. ⚫Increased process reliability due to modern control technology. ⚫Easy maintenance and service. DIE FACE CUTTING ⚫Hinge flange type. ⚫High speed rotation of the knives. ⚫Continuous production of granulate. VIBRATION COOLER ⚫Up & Down two vibrating bed. SILO TANK ⚫Stainless steel. Our Service: Technology innovation, perfect service, and internationalization are always our core values, with this mission we have become the pioneer of twin screw extrusion in the global market and a reliable partner of our customers. TwinScrew will never stop progressing in the field of PVC extrusion and twin screw extrusion; we will no doubt lead the twin screw technology into an ultimate and great attainment.

Medical Grade PVC Pelletizing Extrusion Line | CYKF

Update! A new whole plant export for PVC! Check our Medical Grade PVC Pelletizing Extrusion Line Check our new design, CK-HSD165, a Double Section Recycling Pelletizing Extrusion Line! 1. Integrate discharging, powder supply, liquid supply, and pelletizing system into one extrusion line. The supply systems allow different spec manufacturing for future development. Also, it can reach 150-400 kg per hour. *Productivity should be differed according to different formula. 2. The powder and liquid supply system conclude the process of feeding, weighing, and delivery, and could be finished by a human-machine interface system. 3. The special screw is born for PVC manufacturing. The screw design can avoid high temperature or over-cutting from the process which takes good care of the quality of the PVC pellet.

Innovative Technology in Plastic Recycling | BoReTech-

BoReTech is a leading company in the plastic recycling industry. With more than 30 years experience in the industry, BoRetech is introducing its brand new designed ES process.

Plastic Dryer, Hopper Loader, Gravimatric Blender | SHI NI

Plastic Dryer, Hopper Loader, Gravimatric Blender - Products Overview -Shini Specializes in plastic dryer and hopper dryer. SHINI PLASTICS TECHNOLOGIES, INC. products including hopper loader, gravimatric blender, gravimetric blender, volumatric doser, volumetric doser, mould temperature controller, granulator, material handling system, injection molding robot, hot runner, water chillers, sprue picker, side entry robot,gantry robot and more. The Shini Group, Originate from Taipei, Taiwan since 1969. Five manufacturing bases and one corporate technologies center around the world. World class manufacturer of plastics auxiliary equipment. For 41 years, Shini people adhered to the management principle of Focusing on Particular Business, Pursuing to be the World Leader which created new era and achieved many progresses. Shini Group has now become a world-class manufacture of plastic dryer, hopper dryer, hopper loader, gravimatric blender, gravimetric blender, volumatric doser, volumetric doser, mould temperature controller, granulator, material handling system, injection molding robot, hot runner, water chiller, sprue picker, side entry robot, gantry robot.

Single Screw Pelletizing Extruder CCS1030-STC

Suitable for recycling, coloring, laboratory testing, and more. Simple operation and easy maintenance. Picture of Machine: CCS1030-STC Lab-Scale Extruder Output: 5-20kg/1hr

Two Functioned Garbage Bags on Roll Making Machine | COSMO

Fully Automatic High Speed Two Functioned Single Line & Two Lines Core-less Garbage Bags on Roll Making Machine Machine Model : SR(2)MR(1)-1000-OS-2T-R4S • Core-less bags on roll • star sealing bags / Bottom sealing bags with V, C, N, M shape • Shuttle sealing & feeding system • Four shafts re-wind system

3 Layer Air Bubble Film Extrusion Line | CHI CHANG MACHINERY

【Applications】 The main uses of the Air Bubble Sheet are: Packaging of electronic material with anti-static additive. Agricultural sector (green house) with anti-UV additive. Covering of swimming pool with anti-UV additive. Typical packaging with anti-shock, anti-abrasion and anti-crushing functions. Laminated with paper, PE woven and aluminum foil for making envelope.   【Compnay Introduction】 Since our founding in 1972 CHI CHANG MACHINERY ENTERPRISE CO., LTD has been on a never-ending quest for breakthroughs and innovations in technology. CCM ensures that wherever our customers are in the world, all of our extrusion equipment and services reach outstanding levels of performance. Adhering to our motto of Integrity, Innovative technology and Sustainable services, CCM is dedicated to the design and fabrication of plastic extrusion machinery. 

Flying Knife Cutting Bottom Sealing Bag Making Machine, MGA-BSF-1000W | MING JILEE

Flying Knife Cutting Bottom Sealing Bag Making Machine, MGA-BSF-1000W For Further information:https://www.mingjilee.com/en/product/Wire-Impulse-Bottom-Bag-Sealing-Machine-with-Flying-Knife-Cutter.html

Label Converting and Finishing System | YICHEEN

Machinery in the Video: Label Converting and Finishing System from YICHEEN Features: * Running operated by full rotary die cut method or intermittent die cut method. * Die is easy in change, save a lot of time in die mold adjustment. * Micro adjustable for the depth of die, able to dotted line cut/full cut/kiss cut procession. * Servo driver and HMI control system, easy in operation, to upgrade the speed and precision control. * Sensor detector and alert for broken material to reduce material lost. * Optional module for satisfying customized demands. * Optional Mechanism： EPC, Laminating, Die Cutting (Front & Back Die Cut), Liner Razor, Varnishing, Slitting/Cutting Sheet * Application： IML(in mold label), Self-adhesive Label, Sticker, Foam, IPO, Single/Double sided adhesive, Post-press finishing material, and so on.

Screws / Barrels for Extrusion and Injection Molding | NAN YUN

As leading company of Screws and barrels in Taiwan, Nan Yun is able to provide the highest quality screw and barrel for Extruder Machine. We are continually researching new screw and barrel materials that would best fit the needs for pellet extruder or plastic pelletizing machine, which results in better mixing, and critical melt quality. Nan Yun's engineers work with our customers to provide the best possible extruder screw design for extruder machine such as PVC pelletizing machine, PE pelletizing equipment, Plastic pellet extruder.

Solventless Lamination Machine-LMC-SF1300 | WEBCONTROL

Solventless Laminating-Solventlless Laminator-LMC-SF1300| WEBCONTROL Webcontrol Machinery Corp has been specializing in manufacture of Solventless Laminating since 1988. Webcontrol ceaselessly develop new machine to extend production line for meeting various needs of customers. In additions, we constantly improve our Solventless Laminating with new technology, and innovate to enhances its performance, efficiency and reducing waste on production. Our consistently aim is to build high-performance, sophisticated Converting Machinery with inexpensive price as well as providing fast Solventless Laminating service ensure our worldwide customers must be satisfied.

2023 VietnamPlas Interview | CLF

It's our great honor to interview Jenny from CLF, introducing their injection molding machine TWII 250.

Plastic Inflation Machine | KANG CHYAU

Plastic Inflation Machine - Twin Head HDPE Plastic Inflation Machine-Kang Chyau Specializes in Plastic Inflation Machine. Since its founding in 1988 Kang Chyau Industry has worked constantly to bring out new and innovative Plastic Inflation Machine products and offer customers a wide range of choices. After more than a decade of work our products are now sold in 62 countries around the globe, a true measure of our success in the Plastic Inflation Machine market.

Plastic Recycling & Pelletizing Machine | GEORDING

  【Product Line】 Plastic recycling machine Compounding machine Dyeing & Pelletizing Automatic batch weighing and mixing system Washing line Rubbing drying machine Powerful crusher Shredder Plastic flat board extruder Refuse derived fuel (RDF)   【Company Intro】 GEORDING MACHINERY CO., LTD. has dedicated to innovating their machines with superior features which can process various plastic materials, such as PA, PET, ABS, TPU, Calcium Carbonate and even PE foam. By keeping developing and improving their technology, GEORDING has become one of the leaders of the extruder supplier as well.

Shade Net Knitting Machine - EL system | FUNG CHANG

Shade Net Knitting Machine with EL system from Fung Chang Industrial Co., LTD. Slitting and Extension Machine, Raschel Knitting Machine, Knitting Unit, Winding Unit, HMI Control System, EL System. INQUIRE @ https://www.prm-taiwan.com/com/fung-chang.html?utm_source=youtube.com&utm_medium=social&utm_campaign=YouTube-Video&utm_term=pyfUJbABx3E&utm_content=fungchang

4000 ton injection molding machine | CLF

4000 ton injection molding machine - CLF CLF's Products: ⚫Via continuous challenging high-end injection machinery, CLF has success- fully invented the multi-circuit plastic injection machines, horizontal injection molding Machine, servo-driven hydraulic fully closed-loop controlled injection machine, multi-color/multi- resin injection molding machine, and etc. ⚫With our strength of machinery diversity, we could provide our customers the scheme of installment of whole factory buildings to achieve perfection of techniques and produc- tion capacity, and finally help them save the cost and shorten the investment cycle.

Hydraulic Slitter and Cutting Machine | Yicheen

Yicheen specializes in manufacturing Slitting Machine, which can be applied to various materials such as OPP, BOPP, PET, PVC, and other films. Learn More：https://bit.ly/44ppOtP 【Slitting Machine Features】 PLC computer control system. Non-hydraulic design, no pollution, low noise, best for using in dustless room. Active unwind and servo motor control feeding length, make sure precise cutting length. Anti-static PU roller drive for reducing scrape happened. Adopt air pressure slitting knife. Two steps type feeding system to keep slitting knife running stably. 【Slitting Machine Application】 Film for Solar power and FPD industry such as EVA, TEDLAR, Backsheet, ITO, PET, MICRO, Lens, Copper foil.

Inspection Machine | WEBCONTROL

Webcontrol Machinery Corp.- Manufacturer of inspection machine and more. More information about inspection machine: 1.Inspection Rewinding Machine- INSPECT-J300 2.Doctoring Rewinder Machine- INSPECT-H300/H400/H500 Webcontrol Machinery Corp has been specializing in manufacture of inspection machine since 1988. Webcontrol ceaselessly develop new machine to extend production line for meeting various needs of customers. In additions, we constantly improve our inspection machine with new technology, and innovate to enhances its performance, efficiency and reducing waste on production. Our consistently aim is to build high-performance, sophisticated Converting Machinery with inexpensive price as well as providing fast inspection machine service ensure our worldwide customers must be satisfied.

7 Layer Blown Film Extrusion Machine- Kung Hsing l Multi Layer Blown Film Machine

7 Layer Co-extrusion Blown Film Line Machine provides system that made from germany and Italy ,suitable for industry and agriculture. / 7 Layer Co-extrusion Blown Film Line Machine / ● Auto thickness profile control (auto air ring, germany made) ● 360 degrees thickness profile measurement with oscillating rail (germany made) ● Gain in weight dosing unit (Italy made) ● Ibc computer control system ( Germany made) ● Horizontal oscillating take up unit ● 3-in-1 ( GAP/ Contact Drive/ Surface) winder   / Kung Hsing Main Products / K.S. specialized in blown film machinery, from mono layer to 11 layers, tailored to fit customers' requirements. Monofilament Machiney and Plastic Recycling Machinery are also available.   If you have any questions about the machine, please contact us. ✉ Contact us：https://bit.ly/3I5Busw ▶ Products：https://bit.ly/40vLtiU ✎ Subscribe us：https://bit.ly/3HyAs87 Email：[email protected]

Air Cooling LD/HDPE Recycling Machine, MGB-RP-120 - MING JILEE

Air Cooling LD/HDPE Recycling machine is designs for re-pelletizing PE plastic waste material / t shirt bag die cut wasteThe material can be PE blown film waste, T shirt bag handle die cut waste, etc... Air Cooling Type Plastic Recycling Machine is equipped the power save, the SCR power regulator control. The real power consumption is around 15~20 kg. 1. Machine Specification: (1) Machine dimension a. Main machine : 2,770 (L) × 2,530 (W) × 2,060 (H) mm b. control box : 920 (L) × 420 (W) × 1,660 (H) mm (2) Machine weight : 2,430 kg (3) Power preparation : 45 kg (4) Power consumption : 20 kw 2. Machine Performance: (1) Applicable resin : LDPE / LLDPE / HDPE Waste Film (2) Output a. LD/LLD PE : 50 - 60 kg/hr b. HD/ PE : 40 - 50 kg/hr Air Cooling LD/HDPE Recycling Machine Features: (1) SCR power regular for saving power (2) Rotating die cutting head to get good quality of cutting shape (3) Less space required (4) Extra Cooling fan to cool down the PE material. Air Cooling Type Plastic Recycling Machine Further information: https://www.mingjilee.com/en/product/...

Five-Layer Extruder & Cutting Machine | BONMART

【Machine Features】 Plastic material has its own characters. In co-extrusion system. BONMART uses and combines several kinds of materials, therefore, the characters of single layer tube can't compete with the complex characters of co-extrusion tube. Glossy surface (using: EVOH / RESIN / PE)Extensive color combination (using: PE + PEARL / PE + PIGMENT)Excellent barrier property (using: PE / TIE RESIN / EVOH / TIE RESIN / PE) Scratch and dust free (using: LDPE / LDPE / LLDPE)Co-extrusion is used on pesticide container, toothpaste, side window, multicolor, long preservative cosmetic... etc. 【Company Intro】 BONMART offers complete-line including technology transfer, cost analysis, layout, installation, test run, training and satisfactory after sale services. Using our Squeezable PE Tube equipment is the best choice of good investment, Welcome to contact us for more details any time.

Three Systems for Thermoforming Machines - CHUDONG | CHINAPLAS 2021

PRM Media Channel continues with this great cooperation we began with CPRJ, the official media group of CHINAPLAS, providing insights about Taiwanese experts in the Plastic and Rubber Industry. In this specific case, we had the great opportunity to interview one of our special actors in the Thermoforming Machinery Industry who will give us some great insights into the related industry. CHUDONG Machinery is a professional manufacturer with more than 35 years of experience in manufacturing & developing thermoforming technology and services in forming, cutting, and stacking in one place. The core for growth and success according to CHUDONG is having a strong R&D that can create specific systems for different markets. In this video, our PRM Director Alice will be carrying this interview with President Chester Chen & Vice-President Sophie Lu from CHUDONG Machinery Company. In the following President Chester Chen & V.P. Sophie Lu will be covering more about the three systems for air pressure thermoforming machines for the European, Japanese, and Asian markets: 1. Three Systems for Thermoforming Machines 2. Key Factors for Product Development 3. Differences between these Three Thermoforming Machine Systems 4. 2021 Innovations and Developments  5. CHINAPLAS Exhibition 2021

Jumbo Bag on Roll Machine | SHPC-75 | SING SIANG

Two Platen Plastic Injection Molding Machine | CLF

Two Platen Plastic Injection Molding Machine - Chuan Lih Fa CLF's Products: ⚫Via continuous challenging high-end injection machinery, CLF has success- fully invented the multi-circuit plastic injection machines, horizontal injection molding Machine, servo-driven hydraulic fully closed-loop controlled injection machine, multi-color/multi- resin injection molding machine, and etc. ⚫With our strength of machinery diversity, we could provide our customers the scheme of installment of whole factory buildings to achieve perfection of techniques and produc- tion capacity, and finally help them save the cost and shorten the investment cycle.

3000 Ton Plastic Injection Moulding Machine | CLF

3000 Ton Plastic Injection Moulding Machine - Chuan Lih Fa CLF's Products: ⚫Via continuous challenging high-end injection machinery, CLF has success- fully invented the multi-circuit plastic injection machines, horizontal injection molding Machine, servo-driven hydraulic fully closed-loop controlled injection machine, multi-color/multi- resin injection molding machine, and etc. ⚫With our strength of machinery diversity, we could provide our customers the scheme of installment of whole factory buildings to achieve perfection of techniques and produc- tion capacity, and finally help them save the cost and shorten the investment cycle.

6 Cavities Automatic Injection Heading Machine | BONMART-

Double transferring rollers design. Stopless roller adjustment design. Plate wheel outer finetune mechanism Quick release ink rollers. Printing wheel clean system (200 mm dischargeable) Sleeve Printing Plate wheel pre-register mechanisim.