PRM-Тайвань
классификация: Температура заполнения 85 ℃
Страна: Taiwan
Телефон: 886-4-23345536/ 86-595-88169879
факс: 886-4-23345539/ 86-595-88165687
Контактное лицо: Claire
Запрос сейчас
  • FEATURE
  • Adopt the touch screen control system with 64K color and friendly PLC operation.
  • Exclusively designed machine construction makes it convenient to combine the blow molding machine with conveyor system.
  • The preforms are automatically arranged in order for feeding system at a single way and the dividing carrier is driven by a servo motor; this way will avoid preforms jamming, causing machine down or preforms waste.
  • Adopt a servo control screw driving system; it is rapid, stable, clean and environmentally friendly.
  • The preforms are fed into the heating system in a matrix mode and uniform heated by single-lamp with double-sided heating.
  • Employ a single-lamp with double-side heating design and will save about 50% heating consumption compared with competitor method.
  • With the temperature feedback function, temperature in the heating oven is automatically controlled by adjustment of infrared lamps to reduce prefrom crystallization problems.
  • Specially designed heating box upgrade convenience of maintenance in changing infrared lamp and cooling ramp.
  • The clamping mechanism is driven by a combination of servo motor and cam; this results in accurate and stable motion, low noise and minimal pollution.
  • Utilizes the air recovery system and efficiency up to 50% so that the low-pressure air compressor will not be required. This will save equipment investment costs and energy consumption by up to 15%.
Model TEM08SH2 Unit
Cavity no. 8 cavity
Theoretical Output 6000 BPH
Preform Holder 224 pcs
Heating pitch 54 mm
Cavity pitch 80 mm
Bottle volume 0.75 Ltr. Max.
Preform neck 18-38 Max. (mm)
Preform height 100 Max. (mm)
Bottle diameter 70 Max. (mm)
Bottle height 240 Max. (mm)
Oven no. 1*4 box*channel
Heating power 64 Max. (kW)
Specified power 94 kW
Machine size 360*620*350 cm
Machine wt. 7500 kg
Infrared lamp 32 pcs
Operation pressure  6 Min.(kg/cm2)
Blowing pressure 35 kg/cm2
Specified high-pressure air consume  12000 (for 500ml) L/min
 Chiller temperature range 6-15  ℃
Chiller refrigerating capacity  15480 kcal/hr
Chiller compressor power 8 HP
Chiller outlet pressure  4 kg/cm2
Actual output depends on bottle shape, preform design and quality.
INCLUDE preform infeed systempreform tank, conveyor and unscrambler.
INCLUDE air recovery system. (low-pressure air compressor will NOT be required.)
INCLUDE air cooling system. (Accelerate cooling of the bottle to shorten the cycle time to save the high pressure air consumption.)
Water type temperature controller shall be required for bottom mold.
CARBONATED SOFT DRINK BOTTLE
TEA BOTTLE
Juice Bottle
JUICE BOTTLE