PRM-Тайвань
классификация: Пропорциональный клапан управления потоком
Страна: Taiwan
Телефон: +886-4-24874219
факс: +886-4-24864269
Контактное лицо: Jerry Wu
Видео Запрос сейчас

Функции

  • Компактный
  • Бюджетный
  • Высокая чувствительность
  • Аналоговый/цифровой сигнал
  • Простое управление
  • Полномасштабное линейное управление расходом

 

Промышленное применение

  • Пневматическое паяльное оборудование
  • Смешивание газов
  • Аналитический инструмент
  • Полупроводниковое оборудование
  • Высокая точность и управление потоком с высоким разрешением
  • Лазерная машина

Функции

  • Компактный
  • Бюджетный
  • Высокая чувствительность
  • Аналоговый/цифровой сигнал
  • Простое управление
  • Полномасштабное линейное управление расходом

 

Промышленное применение

  • Пневматическое паяльное оборудование
  • Смешивание газов
  • Аналитический инструмент
  • Полупроводниковое оборудование
  • Высокая точность и управление потоком с высоким разрешением
  • Лазерная машина

Функции

  • Компактный
  • Бюджетный
  • Высокая чувствительность
  • Аналоговый/цифровой сигнал
  • Простое управление
  • Полномасштабное линейное управление расходом

 

Промышленное применение

  • Пневматическое паяльное оборудование
  • Смешивание газов
  • Аналитический инструмент
  • Полупроводниковое оборудование
  • Высокая точность и управление потоком с высоким разрешением
  • Лазерная машина
Series Type     Type   Input Signal
FC 20 + PM 20 - E
  20: 0~65LPM     20: For FC-20   **E: 0-10V
120: 0~230LPM  120: For FC-120 A: 4-20mA
300: 0~400LPM 300: For FC-300 R: RS485 Modbus
1000: 0~1200LPM 1000: For FC-1000  
  1500: For FC-1500  

** For Command Signal type 0-10V, the minimum driving current is 3mA
- The indicated flow rate is air, please consult for liquid flow rate
- Please contact us for customized flow range
★ FC and PM series are calibrated in pair. Before operating, please ensure the serial numbers on FC and PM are in pair in order to prevent potential leakage issue.

Product Precautions

  1. Before piping is connected, it should be thoroughly blown out with air (flushing) or washed to remove chips, cutting oil and other debris from inside the pipe.
  2. When screwing together pipes and fittings, etc., be certain that chips from the pipe threads and sealing material do not get inside the piping. When sealant tape is used, leave 1.5 to 2 thread ridges exposed at the end of the threads.
  3. Do not operate in locations having an atmosphere of corrosive gases, chemicals, sea water, or where there will be contact with the same.
  4. Ensure the fluid passing through the valve does not contain solid particles. Please use a filter before the inlet port.
  5. In locations which receive direct sunlight, provide a protective cover etc.
  6. KaoLu’s product cannot be used as an emergency shutoff. A redundant safety system should be installed in the system to prevent serious injury or loss of life.

Warranty
KaoLu Ent. Co. Ltd. products are warranted to the original purchaser only against defects in material or workmanship for 6 months from the date of manufacture. The extent of KaoLu’s liability under this warranty is limited to repair or replacement of the defective unit at KaoLu’s option. KaoLu shall have no liability under this warranty where improper installation or filtration occurred.