Поиск - Cylinder

ЗАГРУЗИТЬ ЗАЩИТНИК

КАТЕГОРИИ : Системы быстрой смены пресс-форм и зажима

FUNCTION Overload Protector is equipped in Press machine to check hydraulic pressure of cylinder inside the slider. If happen overload, the hydraulic pressure of cylinder will be released immediately within 3/1000 seconds. When happen overload, in order to protect the press and die, the press will stop working immediately after receiving the signal from limit switch. After happen overload, the air will drive hydraulic pump to supply normal working pressure immediately and the press can work normal. It has pressure control valve inside of overload protector, which can adjust hydraulic pressure automatically and eliminate the impact of rising pressure (which cause by oil temperature rise) in pressing process. May select different types of components and control units base on the different types and specifications of press machines.

Vertical Two Tie-Bar Injection Molding Machine

КАТЕГОРИИ : Гидравлические литьевые машины с зажимом

Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production, then reduce the cost of production. High precision mold platen (Parallelism/flatness:0.01/100mm), heavy duty tie bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitride and NIP/Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact, space-saving design, reduce the heavy burden of the floor of factory.

Vertical Single Shuttle Table Injection Machine

КАТЕГОРИИ : Вертикальные литьевые машины

Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production. High precision mold platen ( Parallelism / flatness : 0.02/100 mm), heavy duty tie bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.

Vertical Shuttle Table Injection Molding Machine

КАТЕГОРИИ : Вертикальные литьевые машины

Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production. High precision mold platen ( Parallelism / flatness : 0.02/100 mm), heavy duty tie-bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.

Vertical 4-TIE BAR Injection Machine

КАТЕГОРИИ : Гидравлические литьевые машины с зажимом

Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production. High precision mold platen ( Parallelism / flatness : 0.01/100 mm), heavy duty tie bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.

Система вентилятора с одним клапаном

КАТЕГОРИИ : Системы привода

1. Двойной цилиндр, мощный для уплотнения ворот. 2. Хорошая отметка ворот.

Машина для литья под давлением с двумя пластинами с 400 МБа до 2300 МБ

КАТЕГОРИИ : Литьевые машины по количеству плит

The actuator of the clamping force is installed on the fixed platen of the conventional two platens injection molding machine. The design of the MBE model has four sets of traveling cylinders inside of the movable platen to close the mold and to build up the clamping force at the center of the platen.

Smart Gas Scale for LPG

КАТЕГОРИИ : Оборудование для измерения, контроля и инспекции

VTOZ- Вертикальная винтовая машина для литья под давлением

КАТЕГОРИИ : Автоматические литьевые машины

● Запатентованная сменная 3-в-1 модульная конструкция слайдов. ● Запатентованная конструкция блока впрыска без бокового усилия. ● Запатентованная конструкция вспомогательной пластиковой системы байпаса. ● 2-полосная 4-цилиндровая система прямого зажима. ● Запатентованная центральная радиальная плита прочная в течение 30 лет. ● Двойная защита защитных дверей и защитных световых завес. ● Интеллектуальный программный контроллер облегчает впрыскивание. ● Самая низкая машина для литья под давлением на столе. ● Точная энергосберегающая гидравлическая система.

Вертикальная точная машина для литья под давлением из резины с внутренним винтом (сначала в-первом)

КАТЕГОРИИ : Машины для литья резины под давлением

• Material charging by vertical screw and plunger cylinder, first in -first out , keep the fresh material into the mold, avoid curing in the barrel. • Barrel temperature controlled by built-in water temp. controller (within +-0.5 C).

VTOR-Вертикальная ротационная машина для литья под давлением

КАТЕГОРИИ : Автоматические литьевые машины

● Наименьшая конструкция поворотного стола, максимальный диаметр пресс-формы. ● Костюмы для впрыска Плунжерного типа или системы впрыска винтового типа. ● Запатентованная конструкция вспомогательной пластиковой системы байпаса. ● 2-полосная 4-цилиндровая система прямого зажима. ● Запатентованная центральная радиальная плита прочная в течение 30 лет. ● Защитная защитная решетка. ● Интеллектуальный программный контроллер облегчает впрыскивание. ● Самая низкая машина для литья под давлением на столе. ● Точная энергосберегающая гидравлическая система.

Флексографская печатная машина (Roll to roll)

КАТЕГОРИИ : Машина для печати на тканых мешках

Флексографская рулонная печатная машина для производства полипропиленовой ткани и пленки с покрытием и без покрытия. Преимущество использования одного и того же печатного цилиндра с различной длиной мешка. Простое управление с помощью сенсорного экрана с системой ракельных ножей для высококачественной печати с минимальным расходом чернил.