Stepper-Controlled Proportional Valve 0-5000L/min

Introduction

The FC-3000 Flow Control Valve is designed to provide a large flow modulation range for high flow applications. The FC-3000 is constructed with a anodized stainless steel body that can be used in the most demanding applications. The electronic control provides smooth open/close transitions and fast response time without any lag time or hysteresis effects. This control valve will modulate 0 L/min flow into a 5000 L/min stream with repeatable results from test to test. Because of its’ open frame design, the FC-3000 is easy to clean, eliminating the possibility of fluid contamination and cross-contamination between products. With high repeatability of ±0.1% and high resolution, this valve may be the best choice for difficult flow control situations

The FC-3000 Flow Control Valve is designed to provide a large flow modulation range for high flow applications.

The FC-3000 Flow Control Valve is designed to provide a large flow modulation range for high flow applications. The FC-3000 is a unique valve that combines high resolution and repeatability with excellent flow control characteristics. The stainless steel construction provides long life in harsh environments and makes it easy to clean when required.

The FC-3000 can be used in any process application where accurate, repeatable control of gas flows are required.

The FC-3000 is constructed with stainless steel body that can be used in the most demanding applications.

The FC-3000 is constructed with a rugged stainless steel body that can be used in the most demanding applications. Stainless steel provides excellent durability and long-term performance. Corrosion resistant properties make it easy to clean, maintain and repair if damaged. It also conducts heat better than other materials which results in faster drips to the desired flow rate.

This control valve will modulate a 0 L/min flow into a 5000 L/min stream with repeatable results from test to test.

The FC-3000 is designed to provide a large flow modulation range, from 0 to 5000 L/min. This makes the FC-3000 ideal for chemical and pharmaceutical applications where high resolution control of a wide range of fluids including high viscosity fluids is required. Additionally, the FC-3000 has been designed for easy cleaning, eliminating the possibility of fluid contamination and cross-contamination between products.

The FC-3000 is designed for high resolution control of a wide range of fluids including high viscosity fluids.

The FC-3000 is designed for high resolution control of a wide range of fluids including high viscosity fluids.

The valve is available in flow and pressure ratings up to 3000 gpm (12,000 lpm) with an operating pressure range of 10 psi (0.7 bar) to 300 psi (20 bar). The unit has a maximum temperature rating of 250°F (121°C).

The valves feature: stainless steel bodies with SST nozzles; easy cleaning due to their open design; low maintenance due to modular construction and simple design features; optional 5 piece body for quick replacement; and non-proprietary ESD connection system for field installation ease or factory use.

Because of its’ open frame design, the FC-3000 is easy to clean, eliminating the possibility of fluid contamination and cross-contamination between products.

Because of its' open frame design, the FC-3000 is easy to clean, eliminating the possibility of fluid contamination and cross-contamination between products.

The FC-3000 uses a double check system that provides safety: “the first check valve ensures that no product will flow back into the tank; and second, if there is any problem with one side or another of the valves it will shut down automatically without affecting other valves”.

With high repeatability of ±0.1% and high resolution, the FC-3000 may be the best choice for difficult flow control situations.

The FC-3000 is a high resolution flow control valve capable of providing ±0.1% repeatability over the entire operating range in both directions. This performance makes the FC-3000 an excellent choice for difficult flow control situations such as those involving low pressure drops, small mass flows and narrow temperature ranges.

An integrated position feedback system provides highly accurate position information which is used to compensate for any wear or stress resulting from long time operation at high accuracy levels. This unique feature can be set up by either turning a setting knob on top of the FC-3000 or by using a PC connected with RS232C/RS422A.

Electronic Control

• High Resolution: The valve can be controlled with a resolution as small as 0.2 percent of full flow.

• High Accuracy: The control circuit achieves an accuracy of +/- 0.25 percent of full flow over its entire operating range, which is better than typical analog systems' accuracy of +/- 0.5 percent. This higher level of precision allows the valve to be used for precise applications such as chemical analysis, medical imaging and semiconductor manufacturing processes that require strict control over fluid flow rates and pressures without compromising high throughput performance or reliability.

• High Repeatability: The control system features a repeatable output response to step changes in controller input signals over the entire operating range (1-99%). This repeatability enables precise control of process variables such as pressure drop across a microfluidic chip or temperature rise within instrumentation without sacrificing speed or throughput capabilities

External Sensor Feedback

External sensors such as oxygen concentration sensor or flow sensor provides linearity and repeatability, which are important for process control. Linearity is defined as the change in position over a change in flow. Repeatability is defined as the change in position over time. With integrated position feedback, you get high resolution for both of these characteristics so that your flow control valve can be used within tight tolerances and with greater accuracy than ever before.

High Resolution

The FC-3000 is a high resolution flow control valve. High resolution refers to the ability to control a flow with high accuracy. The FC-3000 provides finer accuracy and more precise control than other types of solenoid valves, allowing you to get the exact flow rate you want.

In addition to its superior precision and accuracy, the FC-3000 has additional features that make it stand out from other types of electronic valves:

• It generates less heat than conventional electronic valves

• It uses less power than standard electronic valve designs

High Accuracy

The FC-3000 is accurate to within 0.1% of its set flow, which means that it can be used as a high-precision control valve. The FC-3000 is also capable of controlling a flow rate down to 0.01%, which makes it an ideal choice for applications where high precision and low flow rates are required.

The FC-3000's accuracy is achieved by using the latest manufacturing techniques and materials available on the market today. In order to ensure that our products meet the highest standards of quality control, we employ only certified personnel in our production facilities.

High Repeatability

Repetition is an important aspect of the operation of a flow control valve. The term repeatability refers to the ability to reproduce the same result repeatedly. This characteristic is called whether or not you are able to get consistent results when using a particular device as part of your process. Repeatability is a measure of how well a process can be repeated and also helps determine how much variability exists in the final product being made by that device.

Stainless Steel Construction

Stainless steel is the preferred choice for flow control valves in demanding applications. Stainless steel is welded together to form a strong, reliable structure that can withstand corrosion in the harshest environments. In fact, many manufacturers consider stainless steel to be an ideal material for the most demanding applications because it's non-reactive and impervious to chemical attack from substances such as acids or caustic solutions.

Conclusion

With all its’ high-tech features, the FC-3000 is an ideal choice for any application that requires precise control of fluid flow.